Zenith XBV613 Service Manual - Page 99
Grease Applications, NOTE: POSITION OF GREASE APPLICATION
UPC - 719192169715
View all Zenith XBV613 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
PROTECTION, MAINTENANCE AND CHECK OF VIDEO FUNCTION 5-2) Grease Applications (1) Grease Application Method Apply grease by using a cloth swab or brush. Care must be exercised so that excess quantity should not be used. If the excessive quantity is applied, wipe it with the gauze soaked in alcohol (Isopropyl Alcohol). NOTE: POSITION OF GREASE APPLICATION (1) Inner Side Surface and Top Surface of Loading Path (2) Stable Adhesion Part of Base P2, P3 (3) Arm Pinch Shaft (4) Gear Wheel Shaft (5) Reel S. T. Shaft (1) (2) (3) (4): KG-684G (Green) (5): PL-433 (Yellow) (2) Regular Grease Application Apply grease to the designated application position every 500 hour. (1) Inner Side Surface and Top Surface of Loading Path (2) Stable Adhesion Part of Base P2, P3 Coil (3) Gear Cam Shaft (4) Gear Drive Shaft (5) Clutch Shaft Groove (6) Guide Part on the Plate Slider Side Wall (Left) (7) Guide Part on the Plate Slider Side Wall (Right) (1) (2) (3) (4) (5) (6) (7): KG684G (Green) 2 2 4 1 1 3 3 Gear Part 5 Chassis (TOP) Cam Part (PL-433.Yellow) 4 6 5 7 Chassis (Bottom) Gear Part (PL-433.Yellow) Cam Part Side Application Gear Sector (KG-684G.Green) Gear Cam Boss Part Side Wall (PL-433.Yellow) Gear Part Side Application (PL-433.Yellow) Base Loading Gear Drive Inner Surface of Guide Rail (KG-684G.Green) 4-21 Chassis (L) Chassis (R) Cam Part (KG-684G , GREEN) Cam Part (KG-684G , GREEN) Gear Rack F/L Lever, Brake Driving Cam Part Lever Tension Driving Cam Part Gear Sector Driving Part Side Wall Guide Part Lever F/R Driving Part Side Wall Guide Part Lever, Spring Driving Part Plate Slider