Zenith ZLD15A1B Operating Guide - Page 13

CONNECTIONS Antenna Connections * For better picture quality, adjust antenna direction. Connecting to wall antenna socket q Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.) Turn clockwise to tighten. 75Ω Round Cable Bronze Wire AUDIO LR ANT IN +75 Ω DC 12V 300Ω Flat Wire Apartment Buildings Wall Connection Jack Antenna Converter Antenna Jack * If you have a 75Ω round cable, insert the bronze wire and then tighten the connection nut. And if you have a 300Ω flat wire, connect the twisted wire to the antenna converter and then connect the converter to the antenna jack. * When using 75Ω round cable, do not bend the bronze wire. It may cause poor picture quality. Connecting to outdoor antenna q This type of antenna is commonly used in single family homes. VHF Antenna UHF Antenna Single Family Home Turn clockwise to tighten. 75Ω Round Cable Bronze Wire N AUDIO LR ANT IN +75 Ω DC 12V 300Ω Flat Wire Antenna Converter Antenna Jack * In poor signal areas, you can get bet- ter picture quality if you install the antenna as shown at right. * If antenna is split for two TVs, use "signal divider" for connection. VHF UHF N AUDIO LR ANT IN +75 Ω DC 12V 206-3779 Signal Amplifier 13