ZyXEL omni.net Plus User Guide - Page 29
Command Sets, Data command sets
View all ZyXEL omni.net Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Omni 56K Plus Series User's Guide Chapter 4 Command Sets This chapter lists the command set the Omni 56K Plus supports. These commands include data command sets, fax command sets and voice command sets. 4.1 Data command sets The basic AT command sets and extended AT& command sets are shown in the following tables. 4.1.1 Basic AT Command Sets Table 4-1 Basic AT Command Sets COMMAND OPTIONS FUNCTION & DESCRIPTION A/ Re-execute the last command once. A> Re-execute the last command once or repeat the last call up to 9 times. (See also S8) Terminate current connection attempt when entered in handshaking state. +++ Escape sequence code, entered in data state, wait for modem to return to on line command mode. All the Following Commands Require an "AT" Prefix: REF. Table 4-2 AT Command Sets Requiring an "AT" Prefix COMMAND A Bn Ds OPTIONS FUNCTION & DESCRIPTION REF. Go on-line in answer mode. (See also S39.2, S43.6) Handshake option. S28.7 B0 * Select CCITT V.22 for 1200 bps B1 Select Bell 212A for 1200 bps communication. Dial s (numbers and options) that follow (see also S38.0, S35.4). The options of s are listed as follows: 0-9, A, B, C, D Digits for dialing #, * P Pulse dialing S23.1 T Tone dialing S23.1 , Pause for a time specified in S8. Remaining digits will be dialed as in-band DTMF. ; Return to command state after dialing. ! Hook flash S56 @ Wait for a 5 second silence before proceeding , otherwise return NO ANSWER. R Reverse handshake. (go on-line in Answer mode) S17.5 Command Sets 4-1