1996 Chevrolet Corvette Owner's Manual - Page 144

Bi-Level You may want to use BI-LEVEL on cool, but sunny days. This setting directsoutside air through the instrument panel vents and floor ducts. the Press BI-LEVEL andFAN UP, then slide the temperature control lever to a comfortable setting. To defrost the side windows quickly, press BI-LEVEL and FAN UP. Then slide the temperature control lever all the way to the right. Direct airflow through the air conditioning outlets closest to the side windows. Cooling The air conditioner works best if you keep your windows closed. On very hot days, open the windows just long enough for the hot air to escape. Press RECIRCULATE and FAN UP. Then slide the temperature control lever to a comfortable setting. Direct airflow through the air conditioning outlets closest to the side windows. After cool-down, adjust the air control buttons to another setting. The compressor works in all settings except VENT and HEATER and at all temperatures above freezing. When the air conditioning compressor is on,you may notice slight changes in your vehicle's engine speed and power. This is normal because the system is designed to cycle the compressor on and off to keep the desired temperature and help fuel economy. Ventilation For mild outside temperatures, when little heating or cooling is needed, you canstill direct outside air through your vehicle. Press VENT and FAN UP, then slide the temperature control lever to a comfortable setting. Defogging and Defrosting Your vehicle has several settings for clearing your windows. The air conditioning compressor will run to help remove moisture from the air. To defrost the windshield quickly, press DEFROST and FAN UP, then slide the temperature control lever all the way to the rightor to theFULL HOT position. 3-3