1996 Chevrolet Corvette Owner's Manual - Page 287

Cleaning theTop of the Instrument Panel Use only mild soap and water to clean the top surfaces of the instrument panel. Sprays containing silicones or waxes may cause annoying reflections in the windshield and evenmake it difficult to see through the windshield under certain conditions. Care of Safety Belts Keep belts clean and dry. I Cleaning Soft-Touch Paint Surfaces Use only mild soap and water to clean the Soft-Touch paint surfaces in your Corvette. Cleaning Speaker Covers Vacuum around aspeaker cover gently, so that the speaker won't be damaged. Some spots and stains will clean off better with just water and mild soap. If something gets on one of them and you need to use a solvent, follow these steps: Gently scrape excess soil from the trim material with a clean, dull knife or scraper. Use very little cleaner, light pressure and clean cloths (preferably cheesecloth). Cleaning should start at the outside of the stain, "feathering" toward the center. Keep changing to a clean section of the cloth. Do not bleachor dye safety belts. you do, it If may severely weaken them. In a crash they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water. Glass Glass should be cleaned often. GM Glass Cleaner (GM Part No. 1050427) or a liquid household glass cleaner will remove normal tobacco smoke and dust films. Don't use abrasive cleaners on glass, because they may cause scratches. Avoid placing decals on theinside rear window, since they may have to be scraped off later. If abrasive cleaners are used on the inside the rear of window, an electric defogger elementmay be damaged. Any temporary license should not be attached across the When you clean a stain from fabric, immediately dry the defogger grid. area with a blow dryerto help prevent a cleaning ring. 6-56