1996 Chevrolet Corvette Owner's Manual - Page 286

If a ring forms after spot cleaning, clean the entire area immediately or it will set. Cleaning Coated Moldings These moldings are around the hatch opening in your Corvette's rear area. 0 Fabric Protection Your Corvette hascarpet that has been treated with Scotchgard" Fabric Protector, a 3M product. It protects fabrics by repelling oil and water, which are the carriers of most stains. Even with protection, you still need this to clean yourcarpet often to keep it looking new. Further information on cleaning is available by calling 1-800-433-3296 (in Minnesota, 1-800-642-6167). When lightly soiled, wipe with a sponge or soft lint-free cloth dampened with water. When heavily soiled, use warm soapy water. 0 Cleaning Vinyl Use warm water and a clean cloth. 0 You can remove scratches from a coated molding by wiping briskly with the solvent-type cleaner described earlier. If a ring forms, repeat the procedure over a larger area, wiping toward the center of the ring. If the ring still remains, wipe the whole molding. Cleaning Leather Use a soft cloth with lukewarm water and a mild soap or saddle soap. For stubborn stains, use a GM Vinylkeather Cleaner or equivalent product. Never use oils, varnishes, solvent-based or abrasive cleaners, furniture polish or shoe polish on leather. 0 Rub with a clean, damp cloth to remove dirt. You may have to do it more than once. Things like tar, asphaltand shoe polish will stain if you don't get themoff quickly. Use a clean cloth and a GM Vinylkeather Cleaner or equivalent product. 0 Soiled leather should be cleaned immediately.If d r is it allowed to work into the finish, can harm the leather. it 6-55