2013 Chevrolet Cruze Owner Manual - Page 112

5-10 Instruments and Controls Here are four things that some owners ask about. None of these show a problem with the fuel gauge: . Engine Coolant Temperature Gauge Safety Belt Reminders Driver Safety Belt Reminder Light There is a driver safety belt reminder light on the instrument cluster. At the service station, the fuel pump shuts off before the gauge reads full. It takes a little more or less fuel to fill up than the gauge indicated. For example, the gauge may have indicated the tank was half full, but it actually took a little more or less than half the tank's capacity to fill the tank. The gauge moves a little while turning a corner or speeding up. The gauge takes a few seconds to stabilize after the ignition is turned on, and will go back to empty when the ignition is turned off. This gauge shows the engine coolant temperature. If the indicator needle moves to the hot side of the gauge toward the H or shaded area, the engine is too hot. If the vehicle has been operated under normal driving conditions, pull off the road, stop the vehicle, and turn off the engine as soon as possible. . . . When the vehicle is started, this light flashes and a chime may come on to remind the driver to fasten their safety belt. Then the light stays on solid until the belt is buckled. This cycle may continue several times if the driver remains or becomes unbuckled while the vehicle is moving. If the driver safety belt is buckled, neither the chime nor the light comes on.