2013 Chevrolet Cruze Owner Manual - Page 279
2013 Chevrolet Cruze Manual
Page 279 highlights
Vehicle Care 10-33 Replacement Bulbs Exterior Lamp Back-Up Lamp Front and Rear Sidemarker Front Parking/Turn Signal Lamp High‐Beam/Low‐ Bean and DRL Headlamp License Plate Lamp Rear Turn Signal Lamp Stoplamp/Taillamp Bulb Number 921K 194 7444NA H13LL Electrical System Electrical System Overload The vehicle has fuses and circuit breakers to protect against an electrical system overload. When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed. This greatly reduces the chance of circuit overload and fire caused by electrical problems. Fuses and circuit breakers protect power devices in the vehicle. Replace a bad fuse with a new one of the identical size and rating. If there is a problem on the road and a fuse needs to be replaced, the same amperage fuse can be borrowed. Choose some feature of the vehicle that is not needed to use and replace it as soon as possible. 3. Turn the bulb socket counterclockwise and pull straight out of the lamp assembly. 4. Remove the bulb by pulling it straight out of the socket. 5. Push the new bulb into the socket. 6. Install the bulb socket by turning clockwise into the license plate lamp assembly. 7. Replace the license plate lamp assembly and tightien the two screws to secure. W5W LL 7443NA 3057K LCP For replacement bulbs not listed here, contact your dealer.