2013 Chevrolet Cruze Owner Manual - Page 56

3-6 Seats and Restraints The passenger seat may take longer to heat up. Remote Start Heated Seats When it is cold outside, the heated seats can be turned on automatically during a remote vehicle start. The heated seats will be canceled when the ignition is turned on. Press the control to use the heated seats after the vehicle is started. Rear Seats Either side of the rear seatback can be folded. To fold the rear seatbacks: 1. Place the front seatbacks in the upright position. See Reclining Seatbacks on page 3‑4. Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat. 2. Unbuckle the rear safety belts and make sure the safety belt buckles are stowed in the pockets in the seat cushion. If available, the controls are on the center stack. The engine must be running to operate the heated seats. Press L or M to heat the driver or passenger seat cushion and seatback. Press the control once for the highest setting. With each press of the control, the heated seat will change to the next lower setting, and then the off setting. Three lights indicate the highest setting and one light the lowest. The heated seat indicator lights on the control do not turn on during a remote start. The temperature performance of an unoccupied seat may be reduced. This is normal. The heated seats will not turn on during a remote start unless the heated seat feature is enabled in the vehicle personalization menu. See Remote Vehicle Start on page 2‑9 and Vehicle Personalization on page 5‑32.