2013 Chevrolet Cruze Owner Manual - Page 93
2013 Chevrolet Cruze Manual
Page 93 highlights
Seats and Restraints If you are using a single tether in the center seating position, or the rear outboard head restraint has been removed, route the single tether over the seatback. 3. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the LATCH path and attempt to move it side to side and back and forth. There should be no more than 2.5 cm (1 in) of movement, for proper installation. 3-43 Head Restraint Removal and Reinstallation The rear outboard head restraints can be removed if they interfere with the proper installation of the child restraint. If you are using a dual tether in the center seating position, or the rear outboard head restraint has been removed, route the dual tether over the seatback. To remove the head restraint: 1. Partially fold the seatback forward. See Rear Seats on page 3‑6 for additional information. 2. Press both buttons on the head restraint posts at the same time, and pull up on the head restraint. 3. Store the head restraint in the trunk of the vehicle. 4. When the child restraint is removed, reinstall the head restraint before the seating position is used.