2013 Chevrolet Cruze Owner Manual - Page 36

2-8 Keys, Doors, and Windows 3. With the vehicle in P (Park) or N (Neutral), press the brake pedal and the ignition button. See Starting the Engine on page 9‑18 for additional information about the vehicle's keyless ignition with pushbutton start. Replace the transmitter battery as soon as possible. 6. Remove the transmitter from the transmitter slot and press K. To program additional transmitters, repeat Steps 4-6. When all additional transmitters are programmed, press and hold the ignition for 10 seconds to exit programming mode. Replace the plastic trim piece from the small storage area. Starting the Vehicle with a Low Transmitter Battery If the transmitter battery is weak, the DIC may display NO REMOTE DETECTED when you try to start the vehicle. The REPLACE BATTERY IN REMOTE KEY message may also be displayed at this time. Battery Replacement To start the vehicle: 1. Remove the plastic trim piece from the small storage area next to the accessory power outlet toward the front of the console, to access the transmitter slot. 2. Push the button on the recognized transmitter to extend the key blade. Insert the key blade into the transmitter slot. Replace the battery if the REPLACE BATTERY IN REMOTE KEY message displays in the DIC. See "Replace Battery in Remote Key" under Key and Lock Messages on page 5‑29. The battery is not rechargeable. To replace the battery: 1. Push the button on the transmitter to extend the key blade.