2013 Chevrolet Traverse Owner Manual - Page 172

6-4 Lighting Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is completed. If the lever is briefly pressed and released, the turn signal flashes three times. The lever returns to its starting position whenever it is released. If after signaling a turn or lane change the arrow flashes rapidly or does not come on, a signal bulb may be burned out. Have any burned out bulbs replaced. If a bulb is not burned out, check the fuse. See Fuses and Circuit Breakers on page 10‑29. and off. This warns others that you are having trouble. Press again to turn the flashers off. The turn signals do not work while the hazard warning flashers are on. Fog Lamps Turn and Lane-Change Signals For vehicles with front fog lamps, the fog lamp button is on the exterior lamp control to the left of the steering column. Use the fog lamps for better vision in foggy or misty conditions. Turn Signal On Chime Move the turn signal lever all the way up or down to signal a turn. An arrow on the instrument cluster flashes in the direction of the turn or lane change. If either one of the turn signals is left on and the vehicle has been driven more than 1.2 km (0.75 mi), a chime will sound. # (Fog Lamps): Press the fog lamp button to turn the fog lamps on or off. A light comes on in the instrument cluster when the fog lamps are in use. The ignition must be on for the fog lamps to work.