2013 Chevrolet Traverse Owner Manual - Page 351

Vehicle Care 10-57 4. Turn the jack on its side, with the bottom facing toward you. 5. Pull the jack straight out, bottom first. 1. Wheel Block 2. Flat Tire The following information explains how to repair or change a tire. 1. Tool Bag 2. Wing Bolt 3. Jack 1. Open the jack storage compartment by pulling on the latch tab, located toward the rear of the vehicle, and pulling the cover off. 2. Remove the wing bolt (2) by turning it counterclockwise. 3. Push the jack (3) up out of the holding bracket and remove the tool bag (1). 1. Jack 2. Wrench (Three-Piece Shown, One-Piece Similar) The tools you will be using include the jack (1) and wrench (2). Tire Changing Removing Tools The tools needed to remove the spare tire are located in the storage compartment on the driver side, at the rear of the vehicle.