2013 Chevrolet Traverse Owner Manual - Page 237
2013 Chevrolet Traverse Manual
Page 237 highlights
Climate Controls outside temperature is over 4°C (40°F). The system is automatically set to outside air, unless it is hot outside and then the air inlet changes to recirculation mode to help quickly cool the vehicle. The recirculation indicator light will come on. 2. Set the temperature for the driver and passenger. To find a comfortable setting, start with a 22°C (73°F) temperature setting and allow about 20 minutes for the system to regulate. Use the driver side or passenger side temperature control to adjust the temperature setting as necessary. The system will remain at the selected setting. Choosing the warmest or coolest temperatures does not cause the vehicle to heat or cool more quickly. To avoid blowing cold air in cold weather, the system delays turning on the fan until warm air is available. Turn the fan knob to override this delay and select the fan speed. Temperature Control The driver and passenger side temperature controls are used to adjust the temperature of the air coming through the system. The temperature can be adjusted even if the system is turned off since outside air still enters the vehicle, unless the recirculation mode is selected. See "Recirculation" later in this section. Driver Side Temperature Control: Turn clockwise or counterclockwise to increase or decrease the driver side temperature. The driver side temperature display will show the temperature setting. Passenger Side Temperature Control: Turn clockwise or counterclockwise to increase or decrease the passenger side 8-5 temperature. The passenger side display will show the temperature setting. SYNC (Synchronized Temperature): Press to set the passenger temperature to match the driver temperature setting. Manual Operation The air delivery mode or fan speed can be manually adjusted. 9 (Fan Control): Turn the knob clockwise or counterclockwise to increase or decrease the fan speed. Turning the fan control knob while in automatic control places the fan speed under manual control. The air delivery mode remains in automatic control. The fan setting displays momentarily and then no longer displays. Air Delivery Modes: Press H, ), 6, or- to change the direction of the airflow in the vehicle. An indicator light comes on in the selected mode button. Pressing a