2013 Chevrolet Traverse Owner Manual - Page 64

3-10 Seats and Restraints 5. Push and pull on the seatback and seat cushion to make sure they are locked in place. 6. Check that the safety belt is not under the seat cushion. 3. Pull forward on the reclining seatback strap (2). The head restraint will fold down automatically. To return the seatback to the seating position, lift the seatback and push it rearward until it locks into place. Push and pull on the seatback to make sure it is locked. Pull up on the head restraint to return it to the upright, locked position. 5. Pull the sliding seat lever (3) forward. The seatback will tilt forward, and the seat will begin sliding forward. Continue to push forward on the seatback until the entire seat moves all the way forward and the seat cushion is folded. Reclining the Seatbacks To recline the seatback: 1. Leaning rearward in the seat, pull the reclining seatback strap (2). 2. Move the seatback to the desired position, and then release the strap (2) to lock the seatback in place. 3. Push and pull on the seatback to make sure it is locked. Returning the Seat to the Seating Position To return the second row seat to its normal seating position: 1. Remove objects on the floor behind the second row seat or in the seat tracks on the floor. 2. Slide the seat rearward by pushing on the seatback until the seat is locked into place. 3. Continue pushing the seatback rearward until the seatback is locked into place. 4. Push down on the rear of the seat cushion until it is locked in place. Adjusting the Seats To adjust the second row seats, pull outward on the seat adjustment handle (1). Slide the seat forward or rearward to the desired position. Release the handle (1), and push and pull on the seat to make sure it is locked. Folding the Seatback To fold the second row seatbacks: 1. Remove anything on or under the seat. 2. Place the armrest in the upright position, and unfasten the safety belt.