2013 Chevrolet Traverse Owner Manual - Page 319

Vehicle Care Allowing the wiper blade arm to touch the windshield when no wiper blade is installed could damage the windshield. Any damage that occurs would not be covered by your warranty. Do not allow the wiper blade arm to touch the windshield. 4. Repeat the steps for the other blade. 2. Push the release lever (2) to disengage the hook and push the wiper arm (1) out of the blade assembly (3). 3. Push the new blade assembly securely in the wiper arm hook until the release lever clicks into place. 4. Return the wiper arm and blade assembly to the rest position on the glass. 10-25 Headlamp Aiming Headlamp aim has been preset and should need no further adjustment. If the vehicle is damaged in a crash, the headlamp aim may be affected. If adjustment to the headlamps is necessary, see your dealer. Rear Wiper Blade To replace the rear wiper blade: 1. Pull the wiper blade assembly away from the backglass. The rear wiper blade will not lock in a vertical position so care should be used when pulling it away from the vehicle.