2013 Chevrolet Traverse Owner Manual - Page 321

Vehicle Care 10-27 License Plate Lamp To replace one of these bulbs: 1. Open the liftgate. See Liftgate on page 2‑8. 7. Turn the lamp assembly into the liftgate engaging the clip side first. 8. Push on the lamp side opposite the clip until the lamp assembly snaps into place. Replacement Bulbs Exterior Lamp License Plate Lamp 4. Turn the bulb socket (1) counterclockwise to remove it from the lamp assembly (3). 5. Pull the bulb (2) straight out of the bulb socket. 2. Push the left end of the lamp assembly toward the right. 3. Turn the lamp assembly down to remove it from the liftgate. 6. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install it into the lamp assembly. Rear Turn Signal Lamp Taillamp/Stop Lamp Bulb Number 194 LL 7443 NA 7444 LL For replacement bulbs not listed here, contact your dealer.