2014 Chevrolet Corvette Owner Manual - Page 154

6-2 Lighting AUTO (Automatic): Sets the exterior lamps to automatic mode. AUTO mode turns the exterior lamps on and off depending on how much light is available outside the vehicle. To override AUTO mode, turn the control to O. To reset to AUTO mode, turn the control to exterior lamps and then back to AUTO. Automatic mode also resets when the vehicle is turned off and then back on again if the control is left in the AUTO position. Exterior Lamps Off Reminder A warning chime will sound if the exterior lamp control is left on in either the headlamp or parking lamp position and the driver door is opened with the ignition off. Flash-to-Pass To use the flash-to-pass feature, briefly pull the turn signal lever toward you. The high-beam indicator flashes to indicate to the other driver that you intend to pass. Headlamp High/ Low-Beam Changer Push the turn signal lever away from you and release to turn the high beams on. To return to low beams, push the lever again or pull it toward you and release. Daytime Running Lamps (DRL) DRL can make it easier for others to see the front of your vehicle during the day. DRL are required on all vehicles first sold in Canada. The DRL system makes the dedicated lamps come on when the following conditions are met: . ; (Parking Lamps): Turns on the parking lamps including all lamps, except the headlamps. The parking lamp indicator light comes on and stays on when the parking lamps are on with the engine off and the ignition to ACC/ ACCESSORY. It is still daylight and the ignition is on. The exterior lamp control is in the AUTO position. The transmission is not in P (Park) or the parking brake is off. . . Turns on the headlamps together with the parking lamps and instrument panel lights. 5 (Headlamps): This indicator light turns on in the instrument cluster when the high-beam headlamps are on.