2014 Chevrolet Corvette Owner Manual - Page 295

Vehicle Care or aggressive cleaners. If necessary, a soft brush can be used to remove dirt. When finished cleaning, thoroughly rinse the fabric. Avoid automatic car washes with overhead brushes or very high-pressure sprays as they can cause damage and leaking. Only lower the top when it is completely dry and avoid leaving the top lowered for extended periods of time to prevent excessive interior weathering. Avoid leaving large amounts of snow on the top for extended periods of time as damage may also occur. 10-71 Cleaning Exterior Lamps/ Lenses, Emblems, Decals and Stripes Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps, lenses and emblems. Follow instructions under "Washing the Vehicle" previously in this section. Lamp covers are made of plastic, and some have a UV protective coating. Use only lukewarm water, a soft cloth, and mild car washing soap to clean exterior lamps and lenses. Do not clean or wipe them while they are dry. Do not use any of the following on lamp covers: . . . Solvents, alcohols, fuels, or other harsh cleaners. Ice scrapers or other hard items. Aftermarket appearance caps or covers while the lamps are illuminated, due to excessive heat generated. . . { Caution Failure to clean lamps properly can cause damage to the lamp cover that would not be covered by the vehicle warranty. Carbon Fiber Panels Carbon fiber panels can be washed and waxed like any other panels. For exposed weave Carbon Fiber, use a clear or black pigmented wax on the inner hood carbon fiber panel. { Caution Using wax on low gloss black finish stripes can increase the gloss level and create a non-uniform finish. Clean low gloss stripes with soap and water only. Abrasive or caustic agents. Washer fluids and other cleaning agents in higher concentrations than suggested by the manufacturer.