2014 Chevrolet Corvette Owner Manual - Page 291
2014 Chevrolet Corvette Manual
Page 291 highlights
Vehicle Care 10-67 8. Do not let the other end touch metal. Connect it to the positive (+) terminal (4) of the good battery. 9. Now connect the black negative (−) cable to the negative (−) terminal (3) of the good battery. Do not let the other end touch anything until the next step. 10. Connect the other end of the negative (−) cable to the negative (−) terminal (2) on the dead battery. 11. Now start the vehicle with the good battery and run the engine for a while. 12. Try to start the vehicle that had the dead battery. If it will not start after a few tries, it probably needs service. 4. Open the rear hatch and lift the carpet on the passenger side of the vehicle to gain access to the battery cover. 5. Remove the battery cover and locate the positive (+) and negative (−) terminals. 6. Check that the jumper cables do not have loose or missing insulation. If they do, you could get a shock. The vehicles could be damaged too. 7. Open the positive terminal trim cover and connect the red positive (+) cable to the positive (+) terminal (1) of the dead battery.