2014 Chevrolet Corvette Owner Manual - Page 217

Driving and Operating paddle shift gear selection, the driver must select the proper gear for the terrain or select D (Drive) on the gear range selector for full automatic transmission operation. Ending Cruise Control . 9-49 Driver Assistance Systems Rear Vision Camera (RVC) The RVC system can assist the driver when backing up by displaying a view of the area behind the vehicle. Warning (Continued) traffic. Failure to use proper care before backing may result in injury, death, or vehicle damage. Always check behind and around the vehicle before backing. An image appears on the infotainment screen when the vehicle is shifted into R (Reverse). The infotainment screen goes to the previous screen after approximately 10 seconds once the vehicle is shifted out of R (Reverse). To return to the previous screen sooner, do one of the following: . To disengage cruise control, step lightly on the brake pedal. If equipped with a manual transmission, press the clutch pedal for several seconds or shift to Neutral to disengage cruise control. Press the * button on the steering wheel. To turn off the cruise control, press the 1 button on the steering wheel. . { Warning The RVC system does not display children, pedestrians, bicyclists, animals, or any other object located outside the camera's field of view, below the bumper, or under the vehicle. Perceived distances may be different from actual distances. Do not back the vehicle using only the RVC screen, during longer, higher speed backing maneuvers, or where there could be cross (Continued) . . Press a hard key on the infotainment system. Shift into P (Park), for an automatic transmission. Reach a vehicle speed of 8 km/h (5 mph). . Erasing Speed Memory The cruise control set speed memory is erased from memory by pressing 1 or if the ignition is turned off. .