2014 Chevrolet Corvette Owner Manual - Page 243

Vehicle Care 2. Remove the four bolts (1) and the hood extractor duct (2). 3. Reverse Step 2 to replace the hood extractor duct. To inspect or replace the engine air cleaner/filter: 10-19 { Caution If the engine coolant surge tank hose is not carefully lifted out of the hose retainers on the air cleaner/filter cover assembly, it may be damaged and cause engine coolant to leak. Damage would not be covered by the vehicle warranty. 1. Carefully lift the surge tank coolant hose (1) from both hose retainers (3) and position the hose to be able to remove the screws securing the air cleaner/ filter endcap. 5. Turn the air cleaner/filter endcap downward and disengage the lower endcap mounting tabs from the lower retention hinge features. Be sure to insert the lower endcap mounting tabs fully into the housing retention hinge features before turning the endcap upward and replacing the screws. 6. Inspect or replace the air cleaner/filter. 7. Reverse Steps 1-6 to replace the air cleaner/filter endcap. 1. Surge Tank Coolant Hose 2. Screws (2) 3. Hose Retainers (2) 4. Air Duct Clamp 5. Electrical Connector 2. Loosen the air duct clamp (4) at the air cleaner/filter housing endcap and move the duct out of the way. 3. Remove the electrical connector (5) from the sensor. 4. Remove the two screws (2).