2014 Chevrolet Corvette Owner Manual - Page 64

3-4 Seats and Restraints Storing Memory Positions To save positions to the "1" and "2" buttons: 1. Adjust the driver seat, outside mirrors, and the power tilt and telescoping steering column to the desired driving positions. 2. Press and hold SET and "1" at the same time until a beep sounds. 3. Repeat Steps 1 and 2 for a second driver using "2." Manually Recalling Memory Positions If the vehicle is off, or in ON/RUN/ START but not in P (Park) (or parking brake is not set on a manual transmission), press and hold "1," "2," or B to manually recall the previously stored memory positions. Releasing "1," "2," or B before the stored positions are reached stops the recall. If the vehicle is in ON/RUN/START and in P (Park), or parking brake is set on a manual transmission, press and release "1," "2," or B to manually recall the previously stored memory positions. Placing the ignition in OFF before the stored positions are reached stops the recall. If something has blocked the driver seat and/or power tilt and telescoping steering column while recalling a memory position, the recall may stop. Remove the obstruction; then press and hold the Memory Seats If equipped, the "1," "2," SET, and B (Exit) buttons on the driver door are used to manually save and recall memory settings for the driver seat, outside mirrors, and power tilt and telescoping steering column. To save positions to the B (Exit) button and easy exit features: 1. Adjust the driver seat, outside mirrors, and power tilt and telescoping steering column to the desired positions for getting out of the vehicle. 2. Press and hold SET and B at the same time until a beep sounds.