2011 Chrysler 300 Owner Manual - Page 154
2011 Chrysler 300 Manual
Page 154 highlights
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Recall Memory with Remote Key Unlock feature can be enabled through the Uconnect™ Touch System, refer to "Uconnect™ Touch Settings" in "Understanding Your Instrument Panel" for further information. Linking And Unlinking The Remote Keyless Entry Transmitter To Memory Your RKE transmitters can be programmed to recall one of two pre-programmed memory profiles by pressing the UNLOCK button on the RKE transmitter. release the side of the rocker switch labeled 1 or 2 accordingly. "Memory Profile Set" (1 or 2) will display in the instrument cluster on vehicles equipped with the EVIC. 4. Press and release the LOCK button on the RKE transmitter within 10 seconds. NOTE: Your RKE transmitters can be unlinked to your memory settings by pressing the SET (S) button followed by the UNLOCK button on the RKE transmitter in Step 4 To program your RKE transmitters, perform the follow- above. ing: Memory Position Recall 1. Remove the Key Fob from the ignition (or change the NOTE: ignition to OFF, for vehicles equipped with Keyless • The vehicle must be in PARK to recall memory posiEnter-N-Go). tions. If a recall is attempted when the vehicle is not in PARK, a message will display in the EVIC (if 2. Select desired memory profile 1 or 2. equipped). 3. Once the profile has been recalled, press and release the SET (S) button on the memory switch, then press and