2011 Chrysler 300 Owner Manual - Page 454

452 MAINTAINING YOUR VEHICLE Do not use abrasive cleaning components, solvents, steel 1. Clean with a wet soft rag or micro-fiber towel. A mild soap solution may be used, but do not use high alcohol wool or other aggressive material to clean the lenses. content or abrasive cleaners. If soap is used, wipe clean Glass Surfaces with a clean damp rag. All glass surfaces should be cleaned on a regular basis with MOPAR௡ Glass Cleaner or any commercial 2. Dry with a soft cloth. household-type glass cleaner. Never use an abrasive type Seat Belt Maintenance cleaner. Use caution when cleaning the inside rear winDo not bleach, dye, or clean the belts with chemical dow equipped with electric defrosters or the right rear solvents or abrasive cleaners. This will weaken the fabric. quarter window equipped with the radio antenna. Do Sun damage can also weaken the fabric. not use scrapers or other sharp instrument that may If the belts need cleaning, use MOPAR௡ Total Clean, a scratch the elements. mild soap solution, or lukewarm water. Do not remove When cleaning the rear view mirror, spray cleaner on the the belts from the vehicle to wash them. Dry with a soft towel or rag that you are using. Do not spray cleaner cloth. directly on the mirror. Replace the belts if they appear frayed or worn or if the Cleaning Plastic Instrument Cluster Lenses buckles do not work properly. The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic.