2011 Chrysler 300 Owner Manual - Page 466

464 MAINTAINING YOUR VEHICLE WARNING! A transient high tension occurs at the bulb sockets of HID headlamps when the headlamp switch is turned ON. It may cause serious electrical shock or electrocution if not serviced properly. See your authorized dealer for service. Standard Low Beam Headlamp, High Beam Headlamp, Park/Turn Lamp, Inner Park Lamp, and Outer Park Lamp 1. Open the hood. NOTE: Removal of the air cleaner filter housing may be necessary prior to replacing bulbs in the headlamp assembly on the driver side of the vehicle. NOTE: On vehicles equipped with HID headlamps, 2. Twist the appropriate bulb and socket assembly counwhen the headlamps are turned on, there is a blue hue to terclockwise, and then pull it out of the headlamp the lights. This diminishes and becomes more white after assembly. approximately 10 seconds, as the system charges. 3. Disconnect the bulb from the socket assembly and install the replacement bulb. 4. Reinstall the bulb and socket assembly into the headlamp assembly, and then turn it clockwise.