2011 Chrysler 300 Owner Manual - Page 265
2011 Chrysler 300 Manual
Page 265 highlights
UNDERSTANDING YOUR INSTRUMENT PANEL 263 Oil Change Required Your vehicle is equipped with an engine oil change indicator system. The ЉOil Change DueЉ message will display in the EVIC for five seconds after a single chime has sounded at the start of each ignition that an oil change is due. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will continue to display each time you cycle the ignition to the ON position. To turn off the message temporarily, press and release the MENU button. To reset the oil change indicator system (after performing the scheduled maintenance) perform the following procedure: 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Cycle the ignition OFF. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. Fuel Economy Press and release the UP or DOWN button until ЉFuel EconomyЉ is highlighted. Press the SELECT button and the next screen will display the following: • Average Fuel Economy/Miles Per Gallon (MPG Bargraph) • Distance To Empty (DTE) • Miles Per Gallon (MPG) 4 1. Cycle the ignition to the ON position. (Do not start the Press the SELECT button to reset the Average Fuel engine). Economy. Press the BACK button to return to the main menu.