2011 Chrysler 300 Owner Manual - Page 169

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 moisture that is sensed on the windshield. Place the The Rain Sensing system has protective features for the wiper switch in the OFF position when not using the wiper blades and arms. It will not operate under the following conditions: system. The Rain Sensing feature can be turned on and off using • Low Temperature Wipe Inhibit - The Rain Sensing feature will not operate when the ignition is placed in the Uconnect Touch™ System, refer to "Uconnect the RUN position, the vehicle is stationary and the Touch™ Settings" in "Understanding Your Instrument outside temperature is below 32°F (0°C), unless the Panel" for further information. wiper control on the multifunction lever is moved, the NOTE: vehicle speed becomes greater than 0 mph (0 km/h) or • The Rain Sensing feature will not operate when the the outside temperature rises above freezing. wiper speed is in the low or high position. • Neutral Wipe Inhibit - The Rain S ensing feature will • The Rain Sensing feature may not function properly not operate when the ignition is placed in the RUN when ice or dried salt water is present on the windposition, the transmission shift lever is in the NEUshield. TRAL position and the vehicle speed is less than • Use of Rain-X௡ or products containing wax or silicone 5 mph (8 km/h), unless the wiper control on the may reduce rain sensor performance. multifunction lever is moved or the shift lever is moved out of the NEUTRAL position. 3