2011 Chrysler 300 Owner Manual - Page 436

434 MAINTAINING YOUR VEHICLE performance of blades may be present with chattering, exceeds the temperature range of your climate. This marks, water lines or wet spots. If any of these conditions rating information can be found on most washer fluid are present, clean the wiper blades or replace as containers. necessary. The fluid reservoir will hold nearly 1 gal (4 L) of washer fluid when the message "Low Washer Fluid" appears in Adding Washer Fluid The windshield washer fluid reservoir is located in the the Electronic Vehicle Information Center (EVIC) (if front of the engine compartment. Be sure to check the equipped). fluid level at regular intervals. Fill the reservoir with WARNING! windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the Commercially available windshield washer solvents residual water. are flammable. They could ignite and burn you. Care When refilling the washer fluid reservoir, apply some must be exercised when filling or working around washer fluid to a cloth or towel and wipe the wiper the washer solution. blades clean. This will help blade performance. Exhaust System To prevent freeze-up of your windshield washer system The best protection against carbon monoxide entry into in cold weather, select a solution or mixture that meets or the vehicle body is a properly maintained engine exhaust system.