2011 Chrysler 300 Owner Manual - Page 469

MAINTAINING YOUR VEHICLE 467 Rear Backup Lamp and Turn Signal Lamps 1. Open the trunk. 7. Disconnect the electrical connector. 8. Continue removing lamp from vehicle in order to access the bulb(s). 2. Remove the trunk trim by removing the grocery hook (using a T-20 torque driver or similar tool), remove the 9. Turn the appropriate bulb and socket assembly counfastener, and pull back the weather strip. terclockwise to remove it from the tail lamp assembly. 3. Pull back the trunk liner to gain access to the tail lamp 10. Disconnect the bulb from the socket assembly and install the replacement bulb. wing nuts. 4. Remove the three wing nuts from the back of the tail 11. Reinstall the bulb and socket assembly into the tail lamp assembly. lamp assembly, and then turn it clockwise. 5. Pull the tail lamp assembly away from the vehicle 12. Reinstall the tail lamp assembly, fasteners, electrical enough to access the electrical connector. connector, and trunk trim. 6. Push the electrical connector locking tab to the side. 13. Close the trunk. 7