2011 Chrysler 300 Owner Manual - Page 52

50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Continue to slide the latch plate up until it clears the Only pull the belt webbing out far enough to comfortably folded webbing. wrap around the occupants mid-section so as to not activate the ALR. If the ALR is activated you will hear a Seat Belts In Passenger Seating Positions ratcheting sound as the belt retracts. Allow the webbing The seat belts in the passenger seating positions are to retract completely in this case and then carefully pull equipped with Automatic Locking Retractors (ALR) out only the amount of webbing necessary to comfortwhich are used to secure a child restraint system. For ably wrap around the occupants mid-section. Slide the additional information refer to "Installing Child Relatch plate into the buckle until you hear a Љclick.Љ straints Using The Vehicle Seat Belt" under the "Child Restraints" section. The chart below defines the type of Automatic Locking Retractor Mode (ALR) - If Equipped feature for each seating position. In this mode, the shoulder belt is automatically preDriver Center Passenger locked. The belt will still retract to remove any slack in First Row N/A N/A ALR the shoulder belt. The Automatic Locking Mode is availSecond Row ALR ALR ALR able on all passenger-seating positions with a combina• N/A - Not Applicable tion lap/shoulder belt. Use the Automatic Locking Mode anytime a child safety seat is installed in a seating • ALR - Automatic Locking Retractor position that has a belt with this feature. Children If the passenger seating position is equipped with an 12 years old and under should always be properly ALR and is being used for normal usage: restrained in the rear seat.