2011 Chrysler 300 Owner Manual - Page 51

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 above the webbing to release the anchorage, then move it you will prefer a higher position. When you release the up or down to the position that fits you best. anchorage try to move it up and down to make sure that it is locked in position. In the rear seat, move toward the center of the seat to position the belt away from your neck. Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate. 2 Adjusting Upper Shoulder Belt As a guide, if you are shorter than average you will 3. Slide the latch plate upward over the folded webbing. prefer a lower position, and if you are taller than average The folded webbing must enter the slot at the top of the latch plate.