2011 Chrysler 300 Owner Manual - Page 55

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 The front passenger seat BeltAlert௡ is not active when the front passenger seat is unoccupied. BeltAlert௡ may be triggered when an animal or heavy object is on the front passenger seat or when the seat is folded flat (if equipped). It is recommended that pets be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts, and cargo is properly stowed. BeltAlert௡ Programming 2. Turn the ignition switch to the ON/RUN position, but do not start the engine. Wait for the Seat Belt Reminder Light to turn off and then proceed to the next step. NOTE: You must perform the following steps within 60 seconds of turning the ignition switch to the ON/RUN position. 2 3. Within 60 seconds of turning the ignition switch to the ON/RUN position, unbuckle and then re-buckle the NOTE: Chrysler Group LLC does not recommend de- driver's seat belt at least three times within 10 seconds, activating the BeltAlert௡. ending with the seat belt buckled. The BeltAlert௡ can be enabled or disabled by your NOTE: Watch for the Seat Belt Reminder Light to turn authorized dealer or by performing the following steps: on while unbuckling the seat belt and turn off while re-buckling the seat belt. It may be necessary to retract 1. With all doors closed, and the ignition switch in any the seat belt. position except ON/RUN or START, buckle the driver's seat belt. 4. Turn the ignition switch to the OFF position. A single chime will sound to signify that you have successfully completed the programming.