2011 Chrysler 300 Owner Manual - Page 312

310 STARTING AND OPERATING • The electronically-controlled transmission provides a precise shift schedule. The transmission electronics are • Accelerator position self-calibrating. Therefore, the first few shifts on a new • Vehicle speed vehicle may be somewhat abrupt or soft until after the break-in period. This is a normal condition, and preThe gear shifting process is continuously adapted, decision shifts will develop within a few shift cycles. pendent on the driving style, the driving situation, and the road characteristics. The shift lever is automatically locked while in the PARK position. To move the shift lever out of the PARK NOTE: position, the brake pedal must be firmly pressed before • After selecting any driving position, wait a moment to the shift lock will release. allow the gear to engage fully before accelerating, especially when the engine is cold. Move the shift lever to the desired position only when the engine is idling normally and the brake pedal is applied. • If there is a need to restart the engine, be sure to press Do not release the brake pedal until ready to drive. The the ENGINE START/STOP button before restarting. vehicle may otherwise accelerate quickly when the shift Transmission engagement may be delayed up to lever is in the DRIVE or REVERSE position. 10 seconds after restart if the ignition is not turned to the OFF position first. • Shift lever position