2013 Chrysler Town & Country Owner Manual - Page 109

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 107 Center Seat LATCH To Install A LATCH-compatible Child Restraint If a child restraint installed in the center position blocks 1. If the selected seating position has a Switchable Autothe seat belt webbing or buckle for the outboard position, matic Locking Retractor (ALR) seat belt, stow the seat do not use that outboard position. If a child seat in the belt, following the instructions below. See the section center position blocks the outboard LATCH anchors or "Installing Child Restraints Using the Vehicle Seat seat belt, do not install a child seat in that outboard Belt" to check what type of seat belt each seating position. position has. 2 WARNING! Never use the same lower anchorage to attach more than one child restraint. Please refer to "Installing The LATCH-Compatible Child Restraint System" for typical installation instructions. 2. Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you can more easily attach the hooks or connectors to the vehicle anchorages. 3. Place the child seat between the lower anchorages for that seating position. For some second row seats, you may need to recline the seat and / or raise the head Always follow the directions of the child restraint manurestraint to get a better fit. facturer when installing your child restraint. Not all child restraint systems will be installed as described here.