2013 Chrysler Town & Country Owner Manual - Page 220

218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting Memory Positions And Linking RKE Transmitter To Memory 4. Adjust the brake and accelerator pedals to the desired positions. NOTE: Each time the SET (S) button and a numbered 5. Turn on the radio and set the radio station presets button (1 or 2) is pressed, you erase the memory settings (up to 10 AM and 10 FM stations can be set). for that button and store a new one. 6. Turn the ignition switch to the OFF position and 1. Insert the ignition key and turn the ignition switch to remove the key. the ON position. 7. Press and release the SET (S) button located on the 2. Press the driver door MEMORY button number 1 if driver's door. you are setting the memory for driver 1, or button 8. Within five seconds, press and release MEMORY number 2 if you are setting the memory for driver 2. button 1 or 2 on the driver's door. The next step must The system will recall any stored settings. Wait for the be performed within 5 seconds if you desire to also use system to complete the memory recall before continua RKE transmitter to recall memory positions. ing to Step 3. 3. Adjust the driver's seat, recliner, and driver's sideview mirror to the desired positions.