2013 Chrysler Town & Country Owner Manual - Page 246

244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense® will retain the last system state (enabled or ParkSense® Sensors disabled) from the last ignition cycle when the ignition is The four ParkSense® sensors, located in the rear fascia/ changed to the ON/RUN position. bumper, monitor the area behind the vehicle that is ParkSense® can be active only when the shift lever is in within the sensors' field of view. The sensors can detect REVERSE. If ParkSense® is enabled at this shift lever obstacles from approximately 18 in (45 cm) up to 79 in position, the system will remain active until the vehicle (200 cm) from the rear fascia/bumper in the horizontal speed is increased to approximately 7 mph (11 km/h) or direction, depending on the location, type and orientaabove. A display warning will appear in the EVIC indi- tion of the obstacle. cating the vehicle is above ParkSense operating speed. ParkSense® Warning Display The system will become active again if the vehicle speed is decreased to speeds less than approximately 6 mph The ParkSense® Warning screen will only be displayed if Sound and Display is selected from the Customer(9 km/h). Programmable Features section of the Electronic Vehicle Information Center (EVIC). Refer to "Electronic Vehicle Information Center (EVIC)/Personal Settings (CustomerProgrammable Features)" in "Understanding Your Instrument Panel" for further information.