2013 Chrysler Town & Country Owner Manual - Page 473

STARTING AND OPERATING 471 3. Press and release the ENGINE START/STOP button The starter motor will disengage automatically in 10 seconds. Once this occurs, release the accelerator pedal, turn once. the ignition switch to the LOCK position, wait 10 to The starter motor will engage automatically, run for 15 seconds, then repeat the "Normal Starting" procedure. 10 seconds, and then disengage. Once this occurs, release the accelerator pedal and the brake pedal, wait 10 to CAUTION! 15 seconds, then repeat the "Normal Starting" procedure. To prevent damage to the starter, wait 10 to 15 seconds Clearing A Flooded Engine (Using Fob With before trying again. Integrated Key) If the engine fails to start after you have followed the After Starting "Normal Starting" or "Extreme Cold Weather" proceThe idle speed is controlled automatically and it will dures, it may be flooded. To clear any excess fuel: decrease as the engine warms up. 1. Press the accelerator pedal all the way to the floor and hold it. 2. Turn the ignition switch to the START position and release it as soon as the starter engages. 5