2013 Chrysler Town & Country Owner Manual - Page 625

MAINTAINING YOUR VEHICLE 623 CAUTION! (Continued) • This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended. that meets the requirements of Chrysler Material Standard MS-12106. When adding engine coolant (antifreeze): • We recommend using MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) that meets the requirements of Chrysler Material Standard MS-12106. Adding Coolant • Mix a minimum solution of 50% OAT engine coolant Your vehicle has been built with an improved engine that meets the requirements of Chrysler Material Stancoolant (OAT coolant conforming to MS-12106) that dard MS-12106 and distilled water. Use higher concenallows extended maintenance intervals. This engine cooltrations (not to exceed 70%) if temperatures below ant (antifreeze) can be used up to ten years or −34° F (−37° C) are anticipated. 150,000 miles (240,000 km) before replacement. To prevent reducing this extended maintenance period, it is • Use only high purity water such as distilled or deionized water when mixing the water/engine coolant important that you use the same engine coolant (OAT (antifreeze) solution. The use of lower quality water coolant conforming to MS-12106) throughout the life of will reduce the amount of corrosion protection in the your vehicle. engine cooling system. Please review these recommendations for using Organic Additive Technology (OAT) engine coolant (antifreeze) 7