2013 Chrysler Town & Country Owner Manual - Page 339

UNDERSTANDING YOUR INSTRUMENT PANEL 337 If the light remains lit with the engine running, your vehicle will usually be drivable. However, see an authorized dealer for service as soon as possible. If the light is flashing when the engine is running, immediate service is required. You may experience reduced performance, an If jump starting is required, refer to "Jump Starting elevated/rough idle or engine stall and your vehicle may Procedures" in "What To Do In Emergencies". require towing. • Electronic Throttle Control (ETC) Light • Engine Temperature Warning Light This light informs you of a problem with the This light warns of an overheated engine conElectronic Throttle Control (ETC) system. The dition. As temperatures rise and the gauge aplight will come on when the ignition is first proaches H, this indicator will illuminate and a single turned ON and remain on briefly as a bulb chime will sound after reaching a set threshold. Further check. If the light does not come on during starting, have overheating will cause the temperature gauge to pass H, the system checked by an authorized dealer. the indicator will continuously flash and a continuous If a problem is detected, the light will come on while the chime will occur until the engine is allowed to cool. engine is running. Cycle the ignition key when the vehicle has completely stopped and the shift lever is placed in the PARK position. The light should turn off. If the charging system light remains on, it means that the vehicle is experiencing a problem with the charging system. Obtain SERVICE IMMEDIATELY. See an authorized dealer. 4