2013 Chrysler Town & Country Owner Manual - Page 221

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 9. Select "Remote Linked to Memory" in the Electronic Vehicle Information Center (EVIC) and enter "Yes". Refer to "Electronic Vehicle Information Center (EVIC)/ Customer-Programmable Features" in "Understanding Your Instrument Panel" for further information. Memory Position Recall NOTE: The vehicle must be in PARK to recall memory positions. If a recall is attempted when the vehicle is not in PARK, a message will be displayed in the EVIC. To recall the memory settings for driver one, press 10. Press and release the LOCK button on one of the RKE MEMORY button 1 on the driver's door or the UNLOCK transmitters. button on the RKE transmitter linked to memory position 1. 11. Insert the ignition key and turn the ignition switch to To recall the memory setting for driver two, press the ON position. MEMORY button 2 on the driver's door or the UNLOCK 12. Repeat the above steps to set the next Memory button on the RKE transmitter linked to Memory Position 2. position using the other numbered Memory button A recall can be cancelled by pressing any of the MEMORY or to link another RKE transmitter to memory. buttons on the driver's door during a recall (S, 1, or 2). When a recall is cancelled, the driver's seat, outside mirrors, and the pedals stop moving. A delay of one second will occur before another recall can be selected. 3