2014 Chrysler 200 Owner Manual - Page 19

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 CAUTION! Always remove the Sentry Key® from the vehicle and lock all doors when leaving the vehicle unattended. Customer Key Programming You can program new keys to the system if you have two valid Sentry Keys® by performing the following procedure: 2 1. Cut the additional Sentry Key® Transponder blank(s) At the time of purchase, the original owner is provided to match the ignition switch lock cylinder key code. with a four-digit Personal Identification Number (PIN). The PIN is required for authorized dealer replacement of 2. Insert the first valid key into the ignition switch. Turn the ignition switch to the ON/RUN position for at keys. Duplication of keys may be performed at an least three seconds, but no longer than 15 seconds. authorized dealer or by using the Customer Key ProThen, turn the ignition switch to the LOCK position gramming procedure. This procedure consists of proand remove the first key. gramming a blank key to the vehicle electronics. A blank key is one which has never been programmed. 3. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position NOTE: When having the Sentry Key® Immobilizer within 15 seconds. After ten seconds, a chime will System serviced, bring all vehicle keys with you to the sound. In addition, the Vehicle Security Light will authorized dealer. begin to flash. Turn the ignition switch to the LOCK position and remove the second key.