2014 Chrysler 200 Owner Manual - Page 26

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Flash Lights With Lock 2. Release both buttons at the same time. The feature will cause the turn signal lights to flash when 3. Test the feature while outside of the vehicle by pressthe doors are locked or unlocked with the RKE transmiting the LOCK/UNLOCK buttons on the RKE transter. This feature can be turned on or turned off. To change mitter with the ignition in the LOCK position and the the current setting, proceed as follows: key removed. • For vehicles equipped with the Electronic Vehicle 4. Repeat these steps if you want to return this feature to Information Center (EVIC), refer to "Electronic Vehicle its previous setting. Information Center (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understand- NOTE: If there is no key in the ignition switch, pressing the LOCK button on the RKE transmitter while you are in ing Your Instrument Panel" for further information. the vehicle will activate the Vehicle Security Alarm • For vehicles not equipped with the EVIC, perform the system. Opening a door with the system activated will following procedure: cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security Alarm system. 1. Press and hold the UNLOCK button on a programmed RKE transmitter for at least 4 seconds, but not longer Illuminated Approach - If Equipped than 10 seconds. Then, press and hold the LOCK This feature activates the headlights for up to 90 seconds button while still holding the UNLOCK button. when the doors are unlocked with the RKE transmitter. The time for this feature is programmable on vehicles