2014 Chrysler 200 Owner Manual - Page 53

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 you will prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position. Rear Seat Belts First Row Second Row Driver N/A ALR Center N/A ALR Passenger ALR ALR 2 The shoulder belt anchorages of the rear three-point belts • N/A - Not Applicable are nonadjustable for outboard and center rear passengers on sedans. The center belt is mounted to the rear • ALR - Automatic Locking Retractor shelf panel and exits through a bezel in the panel. If the passenger seating position is equipped with an ALR and is being used for normal usage: Seat Belts In Passenger Seating Positions The seat belts in the passenger seating positions are Only pull the belt webbing out far enough to comfortably equipped with Automatic Locking Retractors (ALR) wrap around the occupant's mid-section so as to not which are used to secure a child restraint system. For activate the ALR. If the ALR is activated, you will hear a additional information, refer to "Installing Child Re- ratcheting sound as the belt retracts. Allow the webbing straints Using The Vehicle Seat Belt" under the "Child to retract completely in this case and then carefully pull Restraints" section. The chart below defines the type of out only the amount of webbing necessary to comfortably wrap around the occupant's mid-section. Slide the feature for each seating position. latch plate into the buckle until you hear a ЉclickЉ.