2014 Chrysler 200 Owner Manual - Page 390

388 STARTING AND OPERATING If you REGULARLY TOW a trailer for more than 45 • To prevent excess heat generation, avoid continuous driving at high RPM. Reduce vehicle speed as necessary minutes of continuous operation, then change the autoto avoid extended driving at high RPM. Return to a matic transmission fluid and filter as specified for "pohigher gear or vehicle speed when grade and road lice, taxi, fleet, or frequent trailer towing." Refer to the conditions allow. "Maintenance Schedule" for the proper maintenance intervals. Electronic Speed Control - If Equipped NOTE: Check the transmission fluid level (four-speed • Do not use in hilly terrain or with heavy loads. transmission only) before towing. The six-speed transmission does not require a fluid level check before towing. If, • When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until however, you notice fluid leakage or transmission malfuncyou can get back to cruising speed. tion, see your authorized dealer immediately for assistance. AutoStick® • When using the AutoStick® shift control, select the highest gear that allows for adequate performance and avoids frequent downshifts. For example, choose "4" if the desired speed can be maintained. Choose "3" or "2" if needed to maintain the desired speed. • Use speed control in flat terrain and with light loads to maximize fuel efficiency.