2014 Chrysler 200 Owner Manual - Page 212

210 UNDERSTANDING YOUR INSTRUMENT PANEL flash or remain on continuously. Refer to "Occupant 10. Engine Temperature Warning Light Restraints" in "Things To Know Before Starting Your This light warns of an overheated engine condiVehicle" for further information. tion. As engine coolant temperatures rise and the 9. Oil Pressure Warning Light gauge approaches H, this indicator will illuminate and a single chime will sound after reaching a set threshold. This light indicates low engine oil pressure. The Further overheating will cause the temperature gauge to light will come on and remain on when the ignition pass H, and a continuous chime will occur until the switch is turned from the OFF to the ON/RUN position, engine is allowed to cool or the 4 minutes duration is and the light will turn off after the engine is started. If the expired, whichever come first. bulb does not come on during starting, have the system If the light turns on while driving, safely pull over and checked by an authorized dealer. stop the vehicle. If the A/C system is on, turn it off. Also, If the light comes on and remains on while driving, stop shift the transmission into NEUTRAL and idle the vethe vehicle and shut off the engine. DO NOT OPERATE hicle. If the temperature reading does not return to THE VEHICLE UNTIL THE CAUSE IS CORRECTED. normal, turn the engine off immediately and call for The light does not show the quantity of oil in the engine. service. Refer to "If Your Engine Overheats" in "What To This can be determined using the procedure shown in Do In Emergencies" for further information. "Maintaining Your Vehicle".