2014 Chrysler 200 Owner Manual - Page 27

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 equipped with EVIC. For details, refer to "Electronic • For vehicles not equipped with the EVIC, perform the following steps: Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understanding 1. Press the LOCK button on a programmed RKE transYour Instrument Panel" for further information. mitter for at least 4 seconds, but not longer than 10 seconds. Then, press the PANIC button while still To Lock The Doors holding the LOCK button. Press and release the LOCK button on the RKE transmitter to lock all doors. The turn signal lights will flash and 2. Release both buttons at the same time. the horn will chirp once to acknowledge the lock signal. 3. Test the feature while outside of the vehicle by pressSound Horn With Lock ing the LOCK button on the RKE transmitter with the ignition in the LOCK position and the key removed. This feature will cause the horn to chirp when the doors are locked with the RKE transmitter. This feature can be 4. Repeat these steps if you want to return this feature to turned on or off. To change the current setting, proceed as its previous setting. follows: • For vehicles equipped with EVIC, refer to "Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further information. 2