2014 Chrysler 200 Owner Manual - Page 216

214 UNDERSTANDING YOUR INSTRUMENT PANEL HOTOIL When this message is displayed there is a engine oil over-temperature condition. When this condition occurs, the "HOTOIL" message will be displayed in the odom- CHANgE OIL eter along with a chime. Your vehicle is equipped with an engine oil change Refer to "If Your Engine Overheats" in "What To Do In indicator system. The "CHANgE OIL" message will flash Emergencies". in the instrument cluster odometer for approximately 12 seconds after a single chime has sounded to indicate the gASCAP next scheduled oil change interval. The engine oil change If the vehicle diagnostic system detects a leak or change indicator system is duty cycle based, which means the in the evaporative system, or the fuel filler cap is loose, engine oil change interval may fluctuate dependent upon improperly installed, or damaged, the words "gASCAP" your personal driving style. will display in the odometer display area. If this occurs, Unless reset, this message will continue to display each tighten the fuel filler cap properly and press the odomtime you turn the ignition switch to the "ON" position. eter reset button to turn off the "gASCAP" message. To turn off the message temporarily, press and release the (Refer to "Onboard Diagnostic System - OBDII" in Trip Odometer button on the instrument cluster. To reset "Maintaining Your Vehicle" for further information). If the problem continues, the message will appear the next time the vehicle is started. See your authorized dealer service center as soon as possible.