2014 Chrysler 300 Owner Manual - Page 203

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 If you turn the headlights off before the ignition, they will detects vehicle specific light and automatically switches from high beams to low beams until the approaching turn off in the normal manner. vehicle is out of view. NOTE: NOTE: • The lights must be turned off within 45 seconds of placing the ignition in the OFF position to activate this • Automatic High Beam Headlamp Control can be turned on or off using the Uconnect® System, refer to feature. "Uconnect® Settings" in "Understanding Your Instru• The headlight delay time is programmable using the ment Panel" for further information. Uconnect® System, refer to "Uconnect® Settings" in "Understanding Your Instrument Panel" for further • Broken, muddy, or obstructed headlights and taillights of vehicles in the field of view will cause headlights to information. remain on longer (closer to the vehicle). Also, dirt, film, Automatic High Beam Headlamp Control - and other obstructions on the windshield or camera If Equipped lens will cause the system to function improperly. The Automatic High Beam Headlamp Control system If the windshield or Automatic High Beam Headlamp provides increased forward lighting at night by automat- Control mirror is replaced, the mirror must be re-aimed ing high beam control through the use of a digital camera to ensure proper performance. See your local authorized mounted on the inside rearview mirror. This camera dealer. 3