2014 Chrysler 300 Owner Manual - Page 529

MAINTAINING YOUR VEHICLE 527 Engine Oil Viscosity - 3.6L Engine MOPAR® SAE 5W-20 engine oil approved to Chrysler Material Standard MS-6395 such as Pennzoil®, Shell Helix® or equivalent. is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. Engine Oil Viscosity - 5.7L Engine MOPAR® SAE 5W-20 engine oil or equivalent such as Pennzoil® or Shell Helix® is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. The engine oil filler cap also shows the recommended The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil viscosity for your engine. For information on engine oil filler cap location, refer to "Engine Compartengine oil filler cap location, refer to the "Engine Com- ment" in "Maintaining Your Vehicle" for further information. partment" illustration in this section. NOTE: Vehicles equipped with a 5.7L engine must use NOTE: MOPAR® SAE 5W-30 engine oil approved to SAE 5W-20 oil. Failure to do so may result in improper Chrysler Material Standard MS-6395 such as Pennzoil®, operation of the Fuel Saver Technology. Refer to "Fuel Shell Helix® or equivalent may be used when SAE 5W-20 Saver Technology - If Equipped" in "Starting and Operengine oil meeting MS-6395 is not available. ating" for further information. Lubricants that do not have both, the engine oil certification mark and the correct SAE viscosity grade number should not be used. 7